Your Bag
Trace Minerals
Bentonite Clay
A Mineral-Rich Reset for Skin
Trace Minerals’ Bentonite Clay is a one-ingredient powder that mixes into a deep-cleansing face mask designed to lift excess oil and surface buildup while leaving skin feeling smooth and refreshed.
The 16 oz jar contains 100% bentonite clay with no additives and provides enough powder for approximately 10–15 facials. It can also be used in baths, body wraps, poultices, foot soaks, and knee packs according to the brand’s directions.
In stock
- 100% bentonite clay with no additives
- Helps remove excess surface oil, impurities, and dead skin cells
- Supports clean, smooth-feeling skin
- 16 oz makes approximately 10–15 facials
- Mix 3 parts water or raw apple cider vinegar with 1 part clay.
- Stir thoroughly into a smooth paste.
- Apply a thin layer to the face (about 1/8 inch thick).
- Allow the mask to dry for 20–30 minutes; reduce the time for sensitive skin.
- Rinse with lukewarm water.
Use once or twice weekly.
- For external use only.
- Slight redness is normal and should disappear about 30 minutes after removal.
- Discontinue use if irritation occurs.
Key Ingredients Breakdown
- Bentonite Clay: Supports clean, healthy-looking skin and helps draw out surface impurities.
Full Ingredients
100% Bentonite Clay.
Trace Minerals identifies this as a single-ingredient formula made with 100% bentonite clay and no additives. The official product page states there are no known allergens; it does not claim independent finished-product third-party certification.